Summer Starts Here - Save up to 70%
Thule Domestique Roof Bike Rack Review - 2010 Ford Flex- Video
Today on our 2010 Ford Flex, we'll be test fitting the Thule Domestique roof-mounted bike carrier, part number TH513. We'll begin our test fit by placing the carrier onto the vehicle's crossbars. We'll loosen up the Allen bolts on the rear bracket, as well as the Allen bolts at the head of the carrier, to bring both brackets around the underside of the front and rear crossbar. Once we've positioned the brackets over the crossbars, we'll use the Allen key to tighten down the Allen bolts to secure our Thule Domestique to our Ford Flex. Once everything's tightened down and secured, we're ready to load up our bike. We'll undo the tray strap at the rear of the carrier and double check to make sure the skewer's loose as well. more
7/23/2013 11:44:14 AM
Swagman Fork Down Roof Bike Rack Review - 2010 Ford Flex- Video
Today on our 2010 Ford Flex, we'll be test fitting the Swagman Fork Down roof-mounted bike carrier, part number S64710. We'll begin our test fit by placing the carrier onto the vehicle's load bars. We'll start at the head of the carrier and slide the silver brackets around the underside of the front load bar. We'll then use the black wing nuts to thread onto the bracket, securing the head of the carrier to the front load bar. We'll then move to the rear load bar. This time, we'll slide the silver bracket through the top of the carrier, down against the edges of the rear load bar. more
7/23/2013 11:40:15 AM
RockyMounts TieRod Stretch Roof Bike Rack Review - 2010 Ford Flex- Video
Today on our 2010 Ford Flex well be test fitting the RockyMounts Tierod Stretch Roof Mounted Bike Carrier, part number rky1011. Well begin our test fit by placing the carrier on to the vehicles crossbars. Well then remove the black plastic cover at the head of the carrier to bring the rubber-coated steel straps around the underside of the front crossbar. Well then loosen up the Allen bolts at the rear of the carrier to bring the rear bracket around the underside of the rear load bar. Well then tighten down the silver bolt at the head of the carrier tightening the straps to the front load bar. Well then tighten down the Allen bolts at the rear of the carrier for the rear bracket to secure the rear of the carrier to the rear load bar. more
7/18/2013 5:58:09 PM
Yakima FrontLoader Roof Bike Rack Review - 2011 Ford Flex- Video
Today we have a 2011 Ford Flex and we'll be test fitting the Yakima Frontloader Roof-Mounted Bike Carrier part number Y02103. To mount our carrier to our roof rack we'll lift it up and set it on top of our crossbars. We'll fit the front clamp around our front crossbar and use the hand knob to tighten it down. Then we'll slide the rear clamp into position over the rear bar and use the T-bolt and wing nut to tighten it down. Now, we can prep to load a bike. We need to make sure that the front wheel hoop is up and that our wheel strap at the back of the bike carrier is open. more
8/14/2012 3:09:07 PM
Swagman Fork Down Roof Bike Rack Review - 2011 Ford Flex- Video
Today we have a 2011 Ford Flex and we're going to be test fitting the Swagman Fork-Down Roof-Mounted Bike Carrier part number S64710. To mount the carrier to our vehicle we're going to set it up on top of our load bars. We'll fit 2 U-bolts around the load bar up at the front and secure them with the wing nuts. At the rear we'll fit the U-bolt down through the bike rack and over our load bar. We'll take a plate and fit it over the U-bolt from the bottom and secure the plate with 2 wing nuts. With that done our bike rack is secured to roof rack and we're ready to load up a bike. more
8/14/2012 3:07:05 PM
RockyMounts TieRod Roof Bike Rack Review - 2011 Ford Flex- Video
Today on our 2011 Ford Flex we're going to be test fitting the Rockymounts Tierod Roof-Mounted Bike Carrier, part number RKY1014. To mount our bike carrier to our vehicle, we'll simply place it in top of our load bars. At the front we'll feed the straps around our load bar and re-secure them back into the head of the bike rack. We'll use an Allen wrench to tighten those straps down. Then we can reinstall the cover in the head of the bike rack and we'll also make sure that our skewer is open. Then we'll move to the rear of the bike rack where we can secure the clamp around the load bar using the two wing nuts. more
8/14/2012 3:06:51 PM
Yakima FrontLoader Roof Bike Rack Review - 2009 Ford Flex- Video
Today on this 2009 Ford Flex, we're going to do a test fit of part number Y02103 from Yakima; this is a Front loader Bike Carrier. A few notes about this bicycle rack is that it does not require you to remove the front wheel on the bike if it's round, square, and factory crossbars. On this particular vehicle we'll be using the Yakima Roof Rack System. The adjustable arm provides a sure fit for any size wheels. Now we're going to start off our test fit with the bike rack already assembled according to the instructions, so we just got to put it on the roof rack. We'll line it at the front clamp with the front crossbar, and then we'll loosely install it and then go to the back clamp and loosely install it onto the roof rack for the second crossbar. more
5/9/2012 7:01:35 PM
Yakima ForkLift Roof Mounted Bike Rack Review - 2009 Ford Flex- Video
All right today, on this 2009 Ford Flex, we're going to do a test fit of part number Y02098 from Yakima, this is a Forklift Bicycle Rack. A few notes about this bicycle rack that it will work with round crossbars, and square crossbars and most factory crossbars. Now with this particular vehicle, we will be working with the Yakima Roof Rack System. To start off our test fit, our bicycle rack were already assembled according to the instructions, so we just kind of put it on the roof rack. We'll start off by lining the front clamp up with the front crossbar, and then we'll go ahead and tighten it down but loose enough where you can still move it around and will go on to the back clamp in protecting the place as well. Then we'll go ahead and move the bike rack to the position that we want, then we'll go ahead and tighten down both clamps. more
5/9/2012 7:01:12 PM
Filter Videos
Filter Videos
